Tripod Adapters for all Poles (F7304V)

$59.95

For tripod having a shoulder plate radius greater than 54mm / 2.1”.

Type A:
This tripod adapter works with tripods that have a 3/8” male thread on top and a 3/8” female thread at the bottom of the center column. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator and Fanotec poles.

Type B:
This tripod adapter works with tripods that have a top disk with 3/8” thread, and a center column with diameter of 32mm, 28mm, 26mm or 25mm. Tripod with 26mm center column is only recommended for application below 3m. For application above 3m, tripod with 28mm center column or bigger is recommended. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator and Fanotec poles.

Type A Long:
Same as Type A however slightly longer to give greater separation away from Tripod. This tripod adapter is compatible with the Manfrotto 058B tripod.

Type B Long:
Same as Type B however slightly longer to give greater separation away from Tripod.

High end tripods for photography are strong enough to support a 6m pole. Some people even attempt to install a rotator and pole directly onto the tripod. This is very dangerous. Rotators and tripod center columns are designed to withstand vertical loading with minimal bending torque. With a long pole, the torque is increased 15 times. This can cause damage, without noticeable warning, to the tripod center column top disk, rotator and pole base and to the gears on top of the pole. Damage to equipment and potential injury to people in the area should be avoided at all costs. As part of the pole systems, Fanotec has developed these low cost, light weight and safe to use, tripod adapters for use with Fanotec rotators and poles.

 

You can purchase upper and lower together or separately. If purchasing separately $29.95 will be subtracted from price.

images may vary from actual product

Full Description

For tripod having a shoulder plate radius greater than 54mm / 2.1”.

Type A:
This tripod adapter works with tripods that have a 3/8” male thread on top and a 3/8” female thread at the bottom of the center column. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator and Fanotec poles.

Type B:
This tripod adapter works with tripods that have a top disk with 3/8” thread, and a center column with diameter of 32mm, 28mm, 26mm or 25mm. Tripod with 26mm center column is only recommended for application below 3m. For application above 3m, tripod with 28mm center column or bigger is recommended. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator and Fanotec poles.

Type A Long:
Same as Type A however slightly longer to give greater separation away from Tripod. This tripod adapter is compatible with the Manfrotto 058B tripod.

Type B Long:
Same as Type B however slightly longer to give greater separation away from Tripod.

High end tripods for photography are strong enough to support a 6m pole. Some people even attempt to install a rotator and pole directly onto the tripod. This is very dangerous. Rotators and tripod center columns are designed to withstand vertical loading with minimal bending torque. With a long pole, the torque is increased 15 times. This can cause damage, without noticeable warning, to the tripod center column top disk, rotator and pole base and to the gears on top of the pole. Damage to equipment and potential injury to people in the area should be avoided at all costs. As part of the pole systems, Fanotec has developed these low cost, light weight and safe to use, tripod adapters for use with Fanotec rotators and poles.

 

You can purchase upper and lower together or separately. If purchasing separately $29.95 will be subtracted from price.

images may vary from actual product

Current Stock:
SKU: F7304V

Customer Reviews 0 (0 Reviews) Write a Review

Sorry, there are no reviews for this product yet.