Pole Series 2 Lower Unit (F7103)
Features: extends from 3.5'/107cm - 9.3'/2.8m.
Uses: Real Estate, Aerial 360's, General Aerial Photography, Events
Cameras: Ultra Compact, Compact, Compact DSLR
Lenses: Recommended loading is 2kg (4.4lbs) for all poles
THIS LISTING IS FOR LOWER UNIT ONLY.
The Lower unit consists of 3 tubes with diameters of 36mm, 39.75mm and 43.5mm (1.4", 1.56" and 1.7").
Closed length is 107cm (42.13").
Maximum extended height is 283cm (111.42").
The Pole Series 2 Lower unit can also be used with Pole Series 1 to extend the maximum height to 550cm (216.53" or 18ft).
Maximum recommended loading is 2kg (4.4lbs) for all poles at full vertical extension. The lower unit is not designed to be used alone.
IMPORTANT SAFETY NOTES:
* Fanotec Carbon Fiber Poles conduct electricity very well. Please take extreme caution when raising and using these poles around electrical wires.
* Fanotec poles are NOT designed to be mounted onto a rigid tripod. The pole base can be damaged by the added torque generated with the use of camera and lens at full extension.
Lab tests show even our smallest carbon fiber tube is capable of withstanding extreme vertical weight loads exceeding 100kgs. As a quality assurance measure, each pole is subjected to 50kg pulling tension for over 3 hours to test the integrity of joints and locking mechanism before leaving the factory.
The maximum loading is more related to the stability of support base than to the ultimate strength of the pole. With a rigid support such as custom made car mount, the pole can handle far more than 5kg loads. A load exceeding 5kg should be tested properly before using the system in the crowd. Fanotec bears no responsibility for any injury or damage that may cause as a result of the failure of the pole and support system."
CONTRACT #: GS-02F-016CA MADE IN: HONG KONG